cerasonar 4080 ultimate

cerasonar 4080 ultimate

€1.202,58
/

The cerasonar 4080 ultimate is a hybrid-pneumatic driven speaker in a compact form factor. Designed as an easy-to-install and user-friendly invisible full-range speaker, it delivers exceptional performance while remaining completely concealed.

Building on our expertise in invisible speaker technology, our focus was to develop a full-range speaker that excels in high-frequency reproduction. This was achieved through the development of a 25 mm exciter driver, which offers outstanding mid-to-high frequency resolution and best-in-class off-axis frequency response. To ensure reliability and longevity, the exciters feature passive cooling, ferrofluid-based heat management, impedance correction, and a copper ring for voice coil stabilization.

The 8" woofer operates pneumatically, delivering deep and powerful bass while working in perfect harmony with the midrange section. The advanced crossover is equipped with a built-in protection circuit, allowing connection to conventional amplifiers without requiring an additional protection unit.

For the best possible sound experience, we recommend using our cs-500dsp4 or cs-2000dsp4 dsp amplifier. The latest version includes a dedicated 4080 ultimate preset and the option to activate a dynamic bass boost, enhancing bass response at low to mid listening volumes—feel the difference.

Ideally installed in timber constructions, this series guarantees an immersive sound experience, where music is not just heard but felt with every powerful push of the woofer.

 

  • Power rating: 75 w RMS (150 w max)
  • Impedance: 4 ohms
  • Frequency range: 35 - 20.000 hz* / *²
  • Frequency range with cerasonar amp: 30 - 20.000 hz* / *²
  • max SPL: 103 db
  • Dispersion range: 180° x 180° h./v.
  • Single stereo mode: no
  • for humid environments: no
  • Drywall: 1- or 2-layered 12,5 mm plasterboard
  • Installation cut out: 34,5 x 74,5 cm
  • Dimensions: 40,0 x 80,0 x 9,3 cm
  • Weight: 6,7 kg

* depending on installation situation
*² we recommand min. 50 litres installation volume!

  • cerasonar transformator 100v - 50w
  • cerasonar cs-500dsp4 amp
  • cerasonar cs-2000dsp4 amp
  • cerasonar frame/backbox 4080
  • cerasonar placeholder 4080
  • cerasonar speaker installation cable
cad drawing cerasonar 4080 ultimate

cerasonar 4080 ultimate - FULLRANGE

  • cs-500dsp4 v2 - DOWNLOAD
  • cs-2000dsp4 - DOWNLOAD

* We recommend using the additionally available installation frame (backbox) for perfect reproduction of the result.

4080 ultimate - DOWNLOAD

invisible fullrange speaker

cerasonar 4080 ultimate

The new cerasonar 4080 ultimate is an invisible full-range loudspeaker. The 8" woofer delivers powerful and strong basses, the exciter drivers complete the package with clarity and dynamics in the high frequencies.

Ideal for uncomplicated stereo or multi-room audio installations requiring no additional subwoofer.

Optimised exciter to the last detail
How we achieve excellent high-frequency reproduction

Invisible loudspeakers were often seen as a compromise. They had sufficient quality for background sound, but lacked in dynamics and resolution compared to conventional loudspeakers.

The panel material is the decisive component for the quality of the high-frequency reproduction. This can be compared to the aerodynamics of a car. Even a powerful engine cannot compensate for poor aerodynamics, so it is the streamlined design that is decisive for achieving high speeds. In our case, we have chosen a suitable panel material to provide for an excellent basis for the reproduction of high tones.

By using a very light but nevertheless hard material it is possible to reproduce even the highest frequencies pure and cleanly. The two mid-/high-range exciters thus do not require equalisation of the high-frequency range and therefore achieve a treble quality that is no way inferior to a conventional loudspeaker.

4080 ultimate

how to | install
YOUTUBE LINK
Customised flat 8" woofer
Suitable for a wide range of installation environments

Important for us was that the driver delivers a fast impulse behaviour to keep up with the exciter drivers. Fundamental structural modifications were necessary, that are not common for standard low-frequency drivers.

We achieved this by using a stiff and light carbon fibre cone. At high excursions, the cone keeps stable and doesn't flex - important for reproducing sound without distortions. Since the speaker surround represents the next "bootle neck", it was designed drive-optimised and can thus properly carry away the load.

To guarantee a linear frequency response, we added a copper ring on the pole piece for impedance correction. Thanks to the strong magnet system, the new 4080 ultimate can also be used well in smaller volumes such as back boxes or masonry mounting frames. In addition, the rigid basket is extensively ventilated to ensure heat dissipation even under heavy load.

Efficient crossover design
protecting both woofer and exciter drivers

We have linearised the midrange with counterweights and developed a filter that ensures a clean crossover between the woofer and the midrange/tweeter.

In addition, the two paths each have an independent PTC to protect the speaker in case of overload. More over, the exciter drivers are equipped with two aluminium heat sinks to ensure efficient heat dissipation even under heavy load.

By using proprietary woofer and exciter drivers designed in-house, we have managed to reduce the speaker crossover to a minimum of components. This has allowed us to use components, such as high quality foil capacitors in the signal path. No resistors that consume unnecessary energy are used as a result of the homogeneous tuning of the woofer and the exciters.

For connecting of the speaker wire we use the Wago 221-613 terminals, cable diameters up to 6 mm² can be connected quick and reliable.

Recommendation
the perfect complement

The improved cerasonar installation frame can now be used for even more applications. Thanks to the stable construction made of waterproof plywood and the use of Basotect® insulating material, it is also ideal as a backbox to effectively reduce rear noise. 
The innovative optional vibration dampers now also make it possible to reduce structure-borne noise.

The housing comes pre-drilled and can therefore be used for various installation environments, such as:

  • In-situ concrete installation
  • Masonry installation
  • Easy ceiling installation
  • Vibration damper installation (suspended drywall ceiling)

The installation frame is supplied as standard with high-quality cable glands and integrated strain relief from OBO, insulation material from Basotect® as well as an OSB blank panel and alignment battens.

Installation is easy: the factory pre-drilled holes are enlarged with a suitable drill for the desired application, then the cable gland, insulation material and any accessories are fitted.

cerasonar installation frames (backboxes)

100 percent customer satisfaction

Our service includes a 5-year warranty. Our product liability insurance (only valid in Germany) in cooperation with AachenMünchener provides protection against property damage and bears the full costs for a possible restoration. A prerequisite is the registration with us in our company. Each of our cerasonar loudspeakers comes with comprehensive, easy-to-understand installation instructions in picture and video format, which even makes subsequent installation in existing walls extremely easy.