4 channel dsp amp
4x 500W and powerful DSP
The cs-2000dsp4 is the logical continuation of the cs-500dsp4. It is used when even more power and room calibration is necessary.
Basic settings can be made via the LCD display, there is also password protection to prevent the amplifier from unauthorised access.
As it not only comes with 31 input and 10 output filters per channel, but also has a delay and compressor function, among other things.
Analogue input sources (balanced and unbalanced) can be connected via XLR (adapter cable RCA to XLR available on request) or Phoenix terminal. The latter ensure that the signal can also be routed to another amplifier.
With your smartphone
Ideal to determine the correct phase, delay or to make dsp corrections.
For a proper installation of the cerasonar speakers, a prior sound check is indispensable. In order to
check for possible vibration noises (e.g. loose substructure screw connection), the software contains a tone generator (sine tone) which can be used to smoothly adjust the desired frequency.
In addition, a „pink noise“ and „white noise“ can be output. This means that the frequency curve can be checked without connecting an additional measuring system - only a smartphone is necessary.*
4x 500 watts into 4 ohms or 2x 1000 watts into 8 ohms or 70/100V (bridged).
There are two LAN ports; for larger projects, the amplifiers can be connected to each other so that only one LAN port is required for connection. Basic functions of the amplifier can be controlled via the RS232 or RS485. The supplied adapter also allows ON/OFF control of the amplifier via the GPIO port.
*The measurement result depends on the quality of the built-in microphone
A calibrated, external one is recommended.