cerasonar drywall ceiling kit

1. Make a cut-out in the plasterboard, +3 mm for easier handling (e.g. 4062 reference (pro) it is 403 mm x 623 mm)
   
2. Mount the two long wooden slats (M6 Torx screws)
   
3. Feed the speaker cable into the backbox
   
4. Guide the installation frame (backbox) at an angle into the ceiling or wall
   (picture 3)
   
5. Mount two additional wooden slats (M6 Torx screws)
   (picture 4, 5, 6)
   
6. Align the backbox in the centre of the plasterboard cut-out and then secure with sufficient screws
   (picture 7, 8)
   
7. Now mount the speaker
   
   ATTENTION: The stability of the ceiling and the plasterboard must be
   checked and, if necessary, reinforcing batten(s) must be screwed to 
   the substructure and the frame (screw must not penetrate more than
   14 mm into the wood) or, alternatively, the additional cerasonar 
   drywall ceiling anti-vibration kit can be used.